CKT high-voltage wiring analyzers have been designed to provide Users with state-of-the-art wiring testing solutions for virtually any testing requirement. Whether this calls for distributed or concentrated switching, test voltages as high as 2,500 VAC RMS and 3,500 VDC, mobility or portability, multiple test stations, etc., there is a CKT high-voltage system available that will satisfy the requirement.

The CKT high-voltage systems perform testing to ensure:

• That no opens (or partial opens) exist in DC common networks.
• That there is no insulation degradation or dielectric breakdown between circuits.
• That there are no potential arcing conditions wired.
• That relay, circuit-breaker and switch circuits are correctly present.
• That components (resistors, diodes, capacitors, etc.) are of the correct value.

The ability to program test voltages, test currents, and measurement parameters with extremely high resolution, plus the ability of each CKT system to perform measurements with accuracies that are the best in the industry, will provide the User with second-to-none test capabilities.

To view typical applications and installations of CKT high-voltage systems click HERE.

The following test systems are available. Click on the system model number to learn more.

Benchtop Systems:

• Model CKT1175-10. Available with test voltages to 1,000 VDC / 750 VAC RMS and expandable to 1,500 test points.
• Model CKT1190. Test system designed for cable manufacturers. Available with a wide variety of connector adapter modules and test to 1,000 VDC.

Portable Systems:

• Model CKT1175-10. Available with test voltages to 1,000 VDC / 750 VAC RMS and expandable to 1,500 test points.

Systems with Rack-Mounted Switching Matrices:

• Model CKT1175-20. Available with test voltages to 2,000 VDC / 1,500 VAC RMS and expandable to 96,000 test points.

Systems with Distributed Switching Matrices:

• Model CKT1175-50. Available with test voltages to 2,000 VDC / 1,500 VAC RMS and expandable to 96,000 test points. Switching is available packaged in suitcases, Line Replaceable Units (LRU's) and mobile cabinets.

Multiple-Bus Architecture Systems:

• Model CKT1175-MBA. Multiple-bus structure system capable of testing at voltages to 2,000 VDC / 1,500 VAC RMS. Bus structure is available up to 10 levels deep and will support multiple power supply sources, matrix guarding for eliminating parasitic capacitances, various instrumentation, plus providing random access 4-wire resistance and data-bus testing.

Extended Test Voltage Systems:

• Model CKT1180-10 and Model CKT1180-20. Available in benchtop (CKT1180-10) and rack-mount (CKT1180-20) configurations, these systems are available with test voltages to 2,500 VAC RMS and 3,500 VDC.

Multiple Language Support:

All Of the above systems are available with the operator interface in English, German, Italian, French, Spanish, and Chinese languages.